#######################################################################
# patches required for Calorimetry in 4.11.1
########################################################################
# cvs co -r 1.65 CalorObjects/src/Calib.cc
# this picks up Larry's CEM scale tweak
########################################################################
#  tcl fragment to run TrackRefitModule and calorimetry and everything downstream
# Added ZVertexModule
# Added CosmicRayFinder
# Added PhoenixElectrons
# Use PAD_PHYSICS_CDF pass 09
#June 17 - fixed PhoenixTracking talk-to for 4.11.1 -no manual alignment needed
########################################################################
module talk DHInput
  dropList set RefittedPADTracks
  dropList add CalData TowerCorrectionColl
  dropList add CdfJetColl CdfMet 
  dropList add CdfMuonColl 
  dropList add CesClusterColl CprClusterColl
  dropList add CdfEmClusterColl CdfEmObjectColl
  dropList add CesMatchCollection Pi0CandidateCollection CdfTauCollection
  dropList add ZVertexColl:ZVertexColl
exit 

#ET
creator set PROD

#---------------------------
# Puff stuff
#---------------------------
talk PuffModule
#Needed for TrackRefitModule
   puffOnly set  StorableRun2SiStripSet SiClusterSet SiHitSet
   show
exit
#------------------------------------
#Geometry Manager - New May 28 2003
#------------------------------------
talk GeometryManager
   SiliconGeometryMenu
     AlignmentSource set "ofotl_prd_read 100035    2    GOOD"
   exit
   show
 exit	

#-----------------------------------
# Track Refit Module - New June 11 2003
#------------------------
module enable TrackRefitModule
talk TrackRefitModule
  dropL00 set t
  show
exit

module enable ZVertexModule


module enable MuonLinkerModule
module talk MuonLinkerModule
   findProcessName      set t
   processName          set PROD
   findTrackProcessName set t
   trackProcessName     set PROD
   parmSetName          set setProcName
   show
exit
#ET

# remake CES and Calorimeter tower energies
module enable CalorimetryModule
module talk CalorimetryModule
  show
exit
module enable CentralStripClusterModule CESQColl 
talk CentralStripClusterModule
   override_process_name set t
   process_name set PROD
   parmSetName set setProcName
   show
exit


module enable CprClusterModule CPRQColl 
talk CprClusterModule
   overrideProcName set t
   procName set PROD
   parmSetName set setProcName
exit

# remake electron and pi0
module enable EmClusterModule
module talk EmClusterModule
  show
exit
module enable CdfEmObjectModule
module talk CdfEmObjectModule
  show
exit

# remake pi0 and tau
module clone CentralStripClusterModule pi0reco
module talk CentralStripClusterModule-pi0reco
  Collection_strategy set 0
  numberWiresCes_unbiased set 7
  numberStripsCes_unbiased set 5
  numberCWires_unbiased set 7
  numberCStrips_unbiased  set 5
  CollectionDesc set pi0
  show
exit
module enable CesMatchingModule
module talk CesMatchingModule
  show
exit
module enable Pi0ReconstructionModule
module talk Pi0ReconstructionModule
  show
exit
module enable TauFinderModule
module talk TauFinderModule
  show
exit


# run MEt and jets (depending on which jets you want)
module enable CdfMetModule
module talk CdfMetModule
  show
exit
module clone JetCluModule cone0.4
module clone JetCluModule cone1.0
module clone JetCluModule cone0.7
module disable JetCluModule
module talk JetCluModule-cone0.4
  coneRadius set 0.4
  vertexStrategy set 1
  show
exit
module talk JetCluModule-cone1.0
  coneRadius set 1.0
  vertexStrategy set 1
  show
exit
module talk JetCluModule-cone0.7
  coneRadius set 0.7
  vertexStrategy set 1
  parmSetName set cone0.7
  show
exit

#************************
#Back to usual talk-tos
#------------------------
#Cosmic Ray stuff
#------------------------
module enable TofManager
module talk TofManager
   CalibratorType set Test
exit

module enable CT_TrackingModule
module talk CT_TrackingModule
   NoTracking set t
exit 

module enable CosmicFinderModule
module talk CosmicFinderModule
 CalorimetryMenu
  JetCollName set JetCluModule-cone0.4
 exit
show
exit

#****Phoenix stuff starts here****

#=======================
# Set up PhoenixTracking
#=======================

module enable PhoenixTracking
module talk PhoenixTracking
  debugLevel set 0
#Avoid making histograms 
  createHistoFile set false
  makeHistograms set false
  makeNtuples set false
  minEt set 15.0
  maxEta set 2.8

  allowNoBeam set f
  BeamlineFromDB set t
  plugSubMenu
    wPlugEscale set 1.0
    ePlugEscale set 1.0
  exit

  show
  help
exit


#===============================================
#Set up SiPatternRecModule for PhoenixTracking
#===============================================
module enable SiPatternRecModule
module talk SiPatternRecModule

#== no L00 for now
   missingLayer set 0
   PerformKalSvxStandaloneTracking set false
   PerformKalOISvxStandaloneTracking set false
   method set GLOBAL
   inputTracks set Phoenix_Tracking
   outputTracks set PhoenixSI_Tracking
   show
exit

module enable PhoenixElectrons
module talk PhoenixElectrons
#Avoid making histograms and needing to enable HepRootManager
 createHistoFile set false
 show
exit


#****Phoenix stuff ends here****



# pick up the right DB tables
talk CalibrationManager
  ProcessName set PAD_PHYSICS_CDF
  PassName set 09
  show
exit